G Etting Started - Oki F0305 User Manual

Function menu Function menu
level one level two
2. User 1. Machine
Settings Settings
2.Fax
Settings
2-6 G
ettinG started
Function menu
Description
level three
08. Service For technical support. Do not turn this
Mode setting on unless an authorized techni-
cian asks you to do so.
09. Date & Time Sets the current date and time
10. Paper
Selects the paper source for faxing or
Source copying.
11. Page Displays the total number of pages you
Counter have printed and scanned.
12. Scanner You can specify the sleep period of the
Sleep scanner lamp to prolong the life of your
machine's scanner lamp.
01. Scan You can set the following settings for fax
Parameters sending.
• Primary fax resolution
• Primary scanning contrast
• Super fine resolution
02. Print
You can set the following settings for fax
Parameters reception.
• Reduction rate
• Reduction margin
• Half-page reception
03. # of Rings Sets the number of rings before your
machine answers.
04. Redial Sets the number of times and dial inter-
val for automatic fax redialing.
05. Dialing Sets the dialing pause length.
Pause
06. Memory Tx Turns memory transmission on/off.
07. Quick Tx Turns quick memory transmission on/off. Off
08. Select TTI Selects the TTI you want to use.
09. ECM Mode Turns ECM mode on/off.
10. Block Junk Rejects unauthorized incoming faxes.
Fax
11. Security Keeps all received fax messages in
Rx memory until printed manually.
12. Separator Partition each received documents by
Page inserting a separator page.
13. Receive Prints the received date and time on the
TimeStamp top of each received document
14. PIN Mode Prevents unauthorized long-distance
calls.
Setting Page
Off 10-3
On
— 10-3
Fax 10-3
Copy
Fax/Copy
Not Used
— 8-8
Off 10-4
On
Start time: 22:00
Reset time: 06:00
10-5
Normal, Fine,
S-Fine, Gray
Lightest, Light,
Normal, Dark,
Darkest
400dpi, 600dpi
5-7
10-5
Auto, 100%
24 mm (0-85 mm)
Off, On
3 times (3-10 times) 5-6
10-5
2 times (0-10 times) 10-5
1 min. (0-5 min.)
2 sec. (0-10 sec.) 10-5
Off 4-3
On 10-6
4-3
On 10-6
Default 4-16
TTI1
TTI2
TTI3
Off
Off 10-6
On
Off 5-9
Mode1
Mode2
Mode3
Off 9-3
On
Off 5-14
On
Off 10-6
On
Off 9-5
Mode1
Mode2