Memory TransmSsOn; Sending A Fax; Memory Transmission - Oki F0305 User Manual

Sending a fax

Memory transmission

1
Switch to the fax mode by pressing <
Fax Ready
15 Oct 2007
2
Place the document face up on the automatic document feeder (ADF). .
(See page 2-11 for details.)
3
Adjust the scanning resolution and contrast. (See page 4-2.)
4
Dial the fax number.
• Use the numeric keys to dial the number.
–or–
• Press a one-touch key. (See page 3-5.)
–or–
• Press <Speed Dial/Group> and the three-digit code. (See page 3-7.)
–or–
• Use call group dialing. (See page 3-9.)
–or–
• Use the phone directory dialing. (See page 3-10.)
5
Press <Start>. (If you pressed a one-touch key, no need to press <Start>.)
By pressing <Start>, you have given your machine a command.
This command number appears on the first line of the LCD for a few seconds. You will
need to know this command number if you want to cancel the transmission or print a
stored document (See "
== Command:01 ==
6
At the end of the operation, your machine beeps and displays:
**
Whenever you transmit a document, what actually appears on the top line of the LCD depends
on the information stored in the remote fax machine. The line may even be blank.
NOTE
If you want to cancel a transmission during document scanning, press <Stop>.
If you want to cancel a transmission that is in progress, use the review commands feature.
See "Reviewing or canceling commands" on page 4-7.
NOTE
If the call fails, see "Redialing" on page 4-6.
4-4 S
ending faxeS
13:30
Reviewing or canceling commands
Auto Mem100%
Complete **
>.
copy 4 fax 4 Scan
" on page 4-7).