Changing The Lcd Screen Contrast; Using Your Headset - Polycom Cincinnati Bell 550 User Manual

Changing the LCD Screen Contrast

To Adjust the Contrast of the LCD Screen
Step Action
1
Press the Menu Key and then Press 3 (Settings)
2
Use the Arrow Keys or Press 1 (Basic)
3
Either use the Arrow Keys or Press 2 (Contrast)
4
Use the Up or Down Soft Keys to the desired contrast Level
5
Press OK Soft Key to accept change

Using your Headset

If you plan to use a headset for permanent use, there is an optional setting to default all calls to the headset.
To enable Headset Memory Mode: Full-time use
1. Press the Menu Key, using your Soft Keys select. (3) Settings followed by (1) Basic, (1) Preferences, (3)
Headset, then (1) Headset Memory.
2. Use the Up and Down Arrow Keys and press the Select soft key to Enable Headset Memory Mode. (All Calls
will go through your headset automatically now, simply follow the directions for Placing and Receiving Calls)
To disable Headset Memory Mode:
Repeat Steps 1 & 2 select disable
To activate Headset Memory Mode:
Press the Headset Key twice.
You may change between handset, speaker or headset at any time during a call.
Temporary Use
With the headset connected
1. Press the Headset Key
2. Dial the number or dial the number and press the Headset Key
To answer a call, press the Headset Key
Note: You will need to press the headset each time prior to making or answering calls without the headset Memory
Feature enabled.
Page | 18
Business Solutions