How To Use This Manual - Flashforge DREAMER User Manual

A.

HOW TO USE THIS MANUAL

This user manual is divided into four chapter for ease of navigation and
will use examples based on Microsoft Windows 7 operating system. The
first chapter lays out the guide on setting up the Dreamer and preparing
for its first print. You will learn the ins and outs of FlashPrint software in
the second chapter. The third portion is the actual printing and covers
the procedures for various methods of printing and techniques. The last
chapter includes information regarding obtaining support.
PRECAUTION:
Prior to powering on the Dreamer, make sure the power supply switch
is set to 115v if you are located in the United States and Canada. For
other countries, please refer to your country's AC output voltage.
Failure to do so will damage the mainboard. For instructions on how
to do this, please refer to page 14.
Please make sure to read this section carefully prior to setting
• The Dreamer is very sensitive to static electricity, so please make sure
you contact a grounded object before operating the machine.
• Before repairing or making any alterations to the Dreamer, it is
essential that the machine is turned off, and the power cord is
unplugged.
• The Dreamer operates at a very high temperature; allow the nozzle,
extruded plastic and heating plate to cool before touching.
• Certain types of plastic filament may give off a slight odor when
heated. Because of this, the Dreamer should always operate in a well-
ventilated area.
• Do not leave the Dreamer unattended when in operation.
Dreamer User Guide | www.flashforge-usa.com
up and operating the Dreamer.
5