Appendix J
Installing The Power Stacker
Installing The Power Stacker
NOTE: This procedure is for complete installation of the power stacker,
1. Set the printer power switch to O (off).
2. Unplug the power cord.
3. Remove paper.
4. Loosen the three paper guide hold-down screws. Slide the paper guide to
the left and lift it off the card cage. (See Figure 72.)
380
including cable assemblies and the stacker control panel.
Legend:
1.
Paper Guide
2.
Hold-Down Screw (3)
Figure 72. Remove the Paper Guide
1
2