IBM 6400 Maintenance Information Manual page 381

5. Connect the power stacker logic cable P103 to connector J17 on the CMX
controller board. (See Figure 73.)
6. Disconnect the power supply cable from connector J101 on the CMX
controller board. (See Figure 73.)
7. Connect power supply cable connector P101 to the stacker power cable,
then connect the stacker power cable to connector J101 on the CMX
controller board. (See Figure 73.)
8. Route the stacker power cable and the stacker logic cable in front of the
CMX board and through the cutout beneath the card cage fan, as shown
in Figure 73.
7
6
Legend:
1.
2.
3.
4.
5.
6.
7.
Figure 73. Stacker Power and Logic Connections on the CMX Controller Board
5
4
Power Supply Connector P101
CMX Board Connector J101
Connector P103
CMX Board Connector J17
Stacker Logic Cable
Stacker Power Cable
Cutout Beneath Card Cage Fan
1
2
3
381