Installing The Mxd-430 Into A Wall - AMX MXT/D-2000-PAN Instruction Manual

Installing the MXD-430 Into a Wall

The backbox has two locking tabs (one on each side) to help lock the backbox to the wall (see FIG. 52).
These locking tabs are only extended AFTER the backbox is inserted into the wall.
When installing the backbox, make sure that the assembly is in the correct position
and in the correct place. Once the locking tabs are extended and locked into place,
removing the backbox may be difficult without having access to the back of the wall
or causing damage to the wall.
FIG. 53 provides dimensions for the MXD-430:
FIG. 53 MXD-430 - Dimensions
In order to ensure a stable installation, the thickness of the wall material must be a
minimum of .50 inches (1.27cm) and a maximum of .875 inches (2.22cm). The
mounting surface should also be smooth and flat.
Modero X® Series G4 Touch Panels Instruction Manual
Notes:
Dimensions in parenthesis are in millimeters
Additional detailed installation and product drawings are available to view/download at www.amx.com
Installing Wall-Mount (MXD) Panels
69