Mxd-2001-Pan Installation; Installing The Mxd-2001-Pan Into A Wall - AMX Modero X-Series G5 Instruction Manual

MXT/D-2001-PAN - 20.3" X Series G5 Panels

MXD-2001-PAN Installation

Detailed specifications drawings for the
Refer to A Note About Wall and Rack Installation on page 4 for important notes
on thermal concerns with Rack and Wall installations.
The MXD-2001-PAN may be installed directly into a solid surface environment, using either solid surface screws or the
included locking tabs for different mounting options.
Once installed, the MXD-2001-PAN is contained within a clear outer housing known as the Backbox. This Backbox is
removed when installing the device into a wall or when using the optional Rough-In Box accessory (FG039-15).
FIG. 15 MXD-2001-PAN Backbox
For typical mounting surfaces, such as drywall, use the locking tabs as the primary
method for securing the Backbox to the surface. For thin walls or solid surfaces, use
mounting screws (not included).

Installing the MXD-2001-PAN Into a Wall

The MXD-2001-PAN comes with a clear plastic Backbox (FIG. 15) designed to attach the panel to most standard wall
materials. This Backbox has four locking tabs (two on top and two on bottom) to help lock the Backbox to the wall
(FIG. 16).
These locking tabs are only extended AFTER the Backbox is inserted into the wall.
When installing the Backbox, make sure that the assembly is in the correct position
and in the correct place. Once the locking tabs are extended and locked into place,
removing the Backbox may be difficult without having access to the back of the wall
or causing damage to the wall.
The Backbox also has four slots for accepting the temporary mounting posts mounted on the back of the device.
Backbox knockouts (X8)
FIG. 16 MXD-2001-PAN (Landscape)
16
MXD-2001-PAN are available to download from www.amx.com.
Temporary Mounting Posts
Locking Tabs
Locking Tabs
Temporary Mounting Posts
Locking tabs (X4)
MXD/T-2001-PAN and MXD/T-1901-PAN Modero X Series® G5 Panoramic Touch Panels
Backbox