Roland SOLJET PRO4 XF-640 Setup Manual page 6

To Ensure Safe Use
Danger of electrical short, shock, electrocution, or fire
WARNING
Connect to an electrical outlet that com-
plies with this machine's ratings (for
voltage, frequency, and current).
Incorrect voltage or insufficient current may
cause fire or electrical shock.
Never use out of doors or in any location
where exposure to water or high humidity
may occur. Never touch with wet hands.
Doing so may result in fire or electrical
shock.
Never allow any foreign object to get
inside. Never expose to liquid spills.
Inserting objects such as coins or matches
or allowing beverages to be spilled into the
ventilation ports may result in fire or electri-
cal shock. If anything gets inside, immedi-
ately disconnect the power cord and contact
your authorized Roland DG Corp. dealer.
Never place any flammable object
nearby. Never use a combustible aerosol
spray nearby. Never use in any location
where gases can accumulate.
Combustion or explosion may be a danger.
4
Ratings
WARNING
Handle the power cord, plug, and electri-
cal outlet correctly and with care. Never
use any article that is damaged.
Using a damaged article may result in fire
or electrical shock.
When using an extension cord or power
strip, use one that adequately satisfies
the machine's ratings (for voltage, fre-
quency, and current).
Use of multiple electrical loads on a single
electrical outlet or of a lengthy extension
cord may cause fire.
Connect to ground.
This can prevent fire or electrical shock due
to current leakage in the event of malfunc-
tion.
Position so that the power plug is within
immediate reach at all times.
This is to enable quick disconnection of the
power plug in the event of an emergency. In-
stall the machine next to an electrical outlet.
Also, provide enough empty space to allow
immediate access to the electrical outlet.
If sparking, smoke, burning odor, un-
usual sound, or abnormal operation oc-
curs, immediately unplug the power cord.
Never use if any component is damaged.
Continuing to use the machine may result in
fire, electrical shock, or injury. Contact your
authorized Roland DG Corp. dealer.
Do not use the supplied power supply
cord for other products.