Table of Contents
Advertisement
5. Installing the Ink Cartridges
2.
Select the Ink Type.
SELECT INK TYPE
E-SOL
MAX2
v
E-SOL
MAX2
[YES]
w
INSTALL
DRAIN BOTTLE
3.
Perform cleaning with a cleaning stick.
OPEN COVER R
Click
v
APPLY
CLEANING LIQUID
Use one cleaning stick per cleaning session, then discard the stick after use. Reusing cleaning sticks
may reduce printing quality.
34
Press
4C
shown on the left appears.
Press
Press
4C
NO
Make sure the drain bottle is installed.
Press
When the screen shown on the left appears, open the cover R.
Push the area shown in the figure below until you hear a click. Slightly
pull the cover in the direction of the arrow
tion of the arrow
When the message shown on the left appears, put the
cleaning stick in the cleaning liquid and clean the indi-
cated location.
or
several times until the screen
.
to select [YES] and press
.
to remove it.
Area to clean.
.
, and raise it in the direc-
Hide quick links:
Advertisement
Table of Contents
