Roland SOLJET PRO4 XF-640 Setup Manual page 39

v
SET SOL CRT.
FILLING INK...
Never remove an ink cartridge or switch off the power while ink filling is in progress.
If an ink cartridge is removed or the power is switched off while ink filling is in progress, [CLEAN-
ING ERROR] appears on the display screen and ink filling is stopped. In that case, follow the
instructions described in the section "Cleaning error" in "If Error Message Appears" of User's
Manual to recover from the error, and then start from the beginning.
Never pull out the cartridges.
w
CHECK
DRAIN BOTTLE
SETUP SHEET
Insert ink cartridges into slots 1 to 8.
Insert into the slot of
the matching color.
YE YE CY
1 2 3
YE YE CY
Never switch off the main power.
Make sure no discharged fluid is overflowing from the
drain bottle and press
When this screen appears, the ink-filling process is finished.
5. Installing the Ink Cartridges
Filling ink takes about
10 minutes.
.
37