Paper Jam In The Finisher And The Hole Punch Unit (Both Optional) - Toshiba E-Studio 5540c Troubleshooting Manual

1 TROUBLESHOOTING FOR THE HARDWARE

Paper jam in the Finisher and the Hole Punch Unit (both optional)

1
Separate the Finisher from the equipment.
1) Open the front cover of the finisher when the Hole Punch Unit is not installed. Open the Hole Punch Unit cover
when the Hole Punch Unit is installed.
2) Pull the lever to unlock the finisher.
When the Hole Punch Unit is not installed
3) Placing your hands on the positions shown in the figure, move the finisher slowly until it stops, and then open
the front cover of the finisher.
When the Hole Punch Unit is not installed
2
Raise the lever and open the upper receiving tray of
the finisher.
3
Remove the jammed paper.
26 Clearing a Paper Jam
1
2
When the Hole Punch Unit is installed
1
When the Hole Punch Unit is installed
2