Clearing Paper Jams Caused By A Wrong Paper Size Setting - Toshiba E-Studio 5540c Troubleshooting Manual

1 TROUBLESHOOTING FOR THE HARDWARE
5
Holding the green portion, open the upper cover, turn
the dial and remove the paper.
6
Close the upper cover.
7
Return the bridge unit to the inside of the equipment.
8
Close the front cover of the equipment.

Clearing paper jams caused by a wrong paper size setting

Paper jams occur when there is a mismatch between the size of the paper in a drawer or the bypass tray and the one
registered for the corresponding drawer or the bypass tray in the equipment. "Check paper size setting on control panel for
drawer N. Check the direction or size of the paper." or "Check paper size setting on control panel for Bypass. Check the
direction or size of the paper." appears on the touch panel.
In this case, just clearing the jammed paper does not prevent another paper jam. Be sure to follow the procedure below.
Troubleshooting differs depending on how the paper jam has occurred:
P.37 "Jam when making copies or prints (using a drawer)"
P.39 "Jam when making copies or prints (using the bypass tray)"
P.40 "Jam when printing from the FAX"
36 Clearing a Paper Jam
1
3
2
3