Toshiba E-Studio 5540c Troubleshooting Manual page 46

1 TROUBLESHOOTING FOR THE HARDWARE
2
Place the paper corresponding to the set type in the
drawer.
3
Check that the guide width is correct and there is no
folded/curled paper or overloading, and then close
the drawer.
Be sure that the height of the stacked paper does not exceed the
line indicated inside of the side guides.
4
Clear the paper jam following the guidance shown on the touch panel. Then close all
the drawers and covers.
Printing resumes.
Paper jams could occur despite there being consistency between the type of paper in a drawer and the one
registered for the drawer in the equipment. This may be due to two or more sheets being fed together. Take the
paper out of the drawer, fan the stack of paper well and put it back in.
44 Clearing a Paper Jam