Paper Jam In The Bridge Unit - Toshiba E-Studio 5540c Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE

Paper jam in the bridge unit

Do not touch the metal parts or motors of the bridge unit.
You could be burned or the shock could cause an injury to your hand.
Remove the jammed paper from the bridge unit after clearing all the other jams.
You must remove other jammed paper from the equipment before clearing paper from the bridge unit. Pulling the
bridge unit off the equipment without removing the jammed paper may cause the paper to be torn and left inside the
equipment.
1
Open the front cover of the equipment.
2
Putting your hand on the green lever, pull out the
bridge unit until it stops.
3
Holding the green lever, open the lower cover and
remove any paper under it.
4
Close the lower cover.
1 TROUBLESHOOTING FOR THE HARDWARE
2
Clearing a Paper Jam
1
35