Staple Jam In The Saddle Stitch Unit - Toshiba E-Studio 5540c Troubleshooting Manual

1 TROUBLESHOOTING FOR THE HARDWARE
5
Holding the knob, raise the guide, and return it to its
original position.
6
Remove the staples fallen between the staple
cartridge and the staple case or the ones in the staple
receiver.
7
Fit the staple cartridge into the stapler.
When fitting the staple cartridge, hold the green-labeled portion of the
bracket securely so that the bracket does not move.
Insert the cartridge until it is caught by the latch and secured with a
click.
8
Close the front cover of the finisher.

Staple jam in the Saddle Stitch unit

1
Open the front cover of the finisher, and pull out the
Saddle Stitch unit until it stops.
46 Clearing a Staple Jam