Toshiba E-Studio 5540c Troubleshooting Manual page 42

Multifunctional digital color systems
Hide thumbs Also See for E-Studio 5540c:
Table of Contents

Advertisement

1 TROUBLESHOOTING FOR THE HARDWARE
4
Try copying or printing again.
Jam when printing from the FAX
1
Pull out the drawer in which paper jams occurred and
remove all the paper from it.
If such paper jams occur though [AUTO (mm)] or [AUTO (inch)] has
been selected as the paper size, this is caused by the incorrect size
detection of the paper placed in the drawer. In this case, do not
remove the paper and proceed to step 3.
2
Place the paper corresponding to the set size in the
drawer.
3
Check that the guide width is correct and there is no
folded/curled paper or overloading, and then close
the drawer.
Be sure that the height of the stacked paper does not exceed the
line indicated inside of the side guides.
4
Clear the paper jam following the guidance shown on the touch panel. Then close all
the drawers and covers.
Printing resumes.
40
Clearing a Paper Jam

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio 6540cE-studio 6550c

Table of Contents