Paper Jam In The Finisher, Hole Punch Unit And Inserter (All Optional) - Toshiba E-STUDIO 555 Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
5
Close the feeder tray and connect the External Large
Capacity Feeder to the equipment.
Slowly move the External Large Capacity Feeder placing your hands
on the positions shown in the figure.

Paper jam in the Finisher, Hole Punch Unit and Inserter (all optional)

1
Separate the finisher from the equipment.
Separate the finisher from the equipment while pressing the lock lever.
Place your hand on portion A in the figure and then move the finisher
carefully.
2
When the Hole Punch Unit is installed, open the Hole
Punch Unit cover.
3
Turn the green knob until the triangle mark (
within the designated area of the label.
4
Close the Hole Punch Unit cover.
5
Remove paper that sticks out from the paper feeding
side.
1 TROUBLESHOOTING FOR THE HARDWARE
A
) falls
Clearing a Paper Jam 17