Table of Contents
Advertisement
4
Supported Softwares
®
VIA
The "AGP VxD Driver" and "VIA INF Driver" drivers in the "VIA
Service Pack" are supported in Windows
Windows
You must first install VIA
drivers. However, this may not be the case for some AGP cards.
Please read carefully the following information.
To install the VIA Service pack, please follow the steps below.
1. Insert the CD that came with the system board package into a
CD-ROM drive. The autorun screen (Main Board Utility CD) will
appear.
2. Click "VIA Service Pack".
3. The "Welcome" screen will appear. Click "Next". Please read the
"VIA Service Pack readme" carefully before proceeding to step 4.
4. Follow the prompts on the screen to complete the installation.
5. Reboot the system for the drivers to take effect.
84
Service Pack Installation Notes
®
98 SE, Windows
®
Important:
The VGA driver that came with some AGP cards is already
bundled with the AGP VxD driver. Since the version of the
bundled VxD driver may be older than the one provided in the
CD, installing the bundled VxD driver may cause problems. If
you are using this type of card, we recommend that you install
first the AGP card's VGA driver before installing the VIA Service
Pack.
®
®
ME and Windows
Service Pack prior to installing any other
®
95, Windows
98,
®
2000.
Advertisement
Table of Contents
