Table of Contents
Advertisement
3
Award BIOS Setup Utility
IR Transmission Delay
If this option is Enabled, transmission of data will be slower. This is
recommended when you encounter transmission problem with
your device. The options are: Enabled and Disabled.
Onboard Parallel Port
Parallel Port Mode
The options are SPP, EPP, ECP and ECP+EPP. These apply to
standard specifications and will depend on the type and speed of
your device. Refer to your peripheral's manual for the best option.
EPP Mode Select
This is used to select the EPP mode.
ECP Mode Use DMA
This is used to select the DMA channel used for the parallel port.
Game Port Address
This field is used to select the game port's address. The options
are 201, 209 and Disabled.
Midi Port Address
This field is used to select the MIDI por t's address. The options
are 290, 292 and Disabled. If you have selected the MIDI port's
address, you may select its IRQ in the "Midi Port IRQ" field.
Midi Port IRQ
This field is used to select the MIDI port's IRQ. The options are 5
and 10.
64
378/IRQ7, 3BC/IRQ7, 278/IRQ5
IRQ for the onboard parallel por t.
Disabled
Disables the onboard parallel port.
SPP
Allows normal speed operation but in one direction only.
"ECP (Extended Capabilities Port)"
Allows parallel port to operate in bidirectional mode and at a
speed faster than the normal mode's data transfer rate.
"EPP (Enhanced Parallel Port)"
Allows bidirectional parallel por t operation at maximum speed.
Selects the I/O address and
Advertisement
Table of Contents
