Table of Contents
Advertisement
AGP & P2P Bridge Control
Move the cursor to this field and press <Enter>. The following fields
will appear.
AGP Aperture Size
This field is relevant to the memory-mapped graphics data of the
AGP card installed in your system. Leave this in its default setting,
which is 64M.
AGP Mode
This field is used to select the AGP mode of the AGP card installed
on the system board. The default setting is "4X".
AGP Driving Control
Set this field to Manual only if there are compatibility problems with
some AGP cards. When set to Manual, you must select a value in
the "AGP Driving Value" field.
AGP Driving Value
This field is used to select a value for the AGP Driving control. We
recommend that you leave this field in its default setting.
AGP Fast Write
Select Enabled to support the AGP Fast Write function.
AGP Master 1 WS Write
Set this field to Enabled to add one clock tick to AGP write
operations.
AGP Master 1 WS Read
Set this field to Enabled to add one clock tick to AGP read
operations.
CPU & PCI Bus Control
Move the cursor to this field and press <Enter>. The following fields
will appear.
PCI Master 0 WS Write and AGP Master 0 WS Write
When enabled, writes to the PCI or AGP bus are executed with
zero wait state.
Award BIOS Setup Utility
3
59
Advertisement
Table of Contents
