Table of Contents
Advertisement
3
Award BIOS Setup Utility
Resume by Alarm
Date (of Month)
Resume Time (hh:mm:ss)
This is used to set the time you would like the system to power-
on. If you want the system to power-on ever yday as set in the
"Date (of Month)" field, the time set in this field must be later
than the time of the RTC set in the Standard CMOS Features
submenu.
IRQs Activity Monitoring
Move the cursor to this field and press <Enter>. The "Primar y
INTR", and "IRQ3" - "IRQ15" fields will appear. When enabled,
access to the specified IRQ will cause the system to wake up
completely from the power management mode. When disabled,
the system will not wake up from the power management mode
despite access to the specified IRQ.
70
Enabled When Enabled, you can set the date and time you
would like the Soft Power Down (Soft-Off) PC to
power-on in the "Date (of Month)" and "Resume
Time (hh:mm:ss)" fields. However, if the system is
being accessed by incoming calls or the network
prior to the date and time set in these fields, the
system will give priority to the incoming calls or
network.
Disabled Disables the automatic power-on function. (default)
0
The system will power-on everyday according to the
time set in the "Resume Time (hh:mm:ss)" field.
1-31 Select a date you would like the system to power-on.
The system will power-on on the set date, and time
set in the "Resume Time (hh:mm:ss)" field.
Advertisement
Table of Contents
