Table of Contents
Advertisement
1
Introduction
Wake-On-Ring
This feature allows the system that is in the Suspend mode or Soft
Power Off mode to wake-up/power-on to respond to calls coming
through an internal or external modem. Refer to "Wake-On-Ring
Connector" in chapter 2 and "Resume On LAN/Ring" ("Wake Up
Events" field) in the Power Management Setup section in chapter 3
for more information.
RTC Timer to Power-on the System
The RTC installed on the system board allows your system to
automatically power-on on the set date and time. Refer to "Resume
By-Alarm" ("Wake Up Events" field) in the Power Management
Setup section in chapter 3 for more information.
Wake-On-LAN
The Wake-On-LAN function allows the network to remotely wake
up a Soft Power Down (Soft-Off) PC . Your LAN card must support
the remote wakeup function. Refer to "Wake-On-LAN Connector" in
chapter 2 and "Resume On LAN/Ring" ("Wake Up Events" field) in
the Power Management Setup section in chapter 3 for more
information.
AC Power Failure Recovery
When power returns after an AC power failure, you may choose to
either power-on the system manually, let the system power-on
automatically or return to the state where you left off before power
failure occurs. Refer to "PWR Lost Resume State" in the Power
Management Setup section in chapter 3 for more information.
12
Important:
If you are using a modem add-in card, the 5VSB power source
of your power supply must support a minimum of ≥ 720mA.
Important:
The 5VSB power source of your power supply must support a
minimum of ≥ 720mA.
Advertisement
Table of Contents
