Memory; Operation - Skoda Citigo Owner's Manual

The multi-functional indicator can only be operated when the ignition is switched
on. After the ignition is switched on, the function displayed is the one which you
last selected before switching off the ignition.
The multi-functional indicator appears in the display
WARNING
Concentrate fully at all times on your driving! As the driver you are fully re-
sponsible for road safety.
Note
In certain national versions the displays appear in the Imperial system of meas-
ures.

Memory

ä
First read and observe the introductory information and safety warn-
ings on page 12.
The multi-functional indicator is equipped with two automatic memories. The se-
lected memory is shown in the Display
The data of the single-trip memory (memory 1) is shown if a 1 appears in the dis-
play. A 2 shown in the display means that data relates to the total distance mem-
ory (memory 2).
Switching over the memory takes place with the button
shield wiper lever.
» Fig. 5.
Fig. 5
Multi-functional indicator
» Fig. 5.
» Fig. 6 on the wind-
B
Single-trip memory (memory 1)
The single-trip memory collates the driving information from the moment the ig-
nition is switched on until it is switched off. New data will also flow into the cal-
culation of the current driving information if the trip is continued within 2 hours
after switching off the ignition. If the trip is interrupted for more than 2 hours,
the memory is automatically erased.
Total-trip memory (memory 2)
The total distance driven memory gathers data from any number of individual
journeys up to a total of 19 hours and 59 minutes driving or 1 999 kilometres driv-
en. The memory is deleted when either of these limits is reached and the calcula-
tion starts all over again.
The total-trip memory will not, contrary to the single-trip memory, be deleted af-
ter a period of interruption of driving of 2 hours.

Note
All values in the memory No. 1 and No. 2 are erased if the battery of the vehicle is
disconnected.

Operation

ä
First read and observe the introductory information and safety warn-
ings on page 12.
The rocker switch and the button
A
er » Fig. 6.
Select memory
›
Briefly pressing the button
Fig. 6
Multi-functional indicator: Con-
trol elements
are located on the windshield wiper lev-
B
» Fig. 6 allows to select the desired memory.
B
Instruments and warning lights

£
13