Table of Contents
Advertisement
24 Keys, locks and alarm system ›
Memory function of the key
Functionality
Applies to vehicles that do not have the personalisa-
tion function.
Each time the vehicle is locked, the position of the
driver's seat and rearview mirror are stored in the
memory of the remote key being used to lock the
vehicle.
Operation
Retrieve stored position
›
Unlock the vehicle and open the driver's door.
The driver's seat and the exterior mirrors occupy the
position assigned in the memory to the key used to
unlock the vehicle.
Stop position change
›
Press any button on the seat to be adjusted.
Or:
›
Press the
button on the key.
Settings
Storing driver's seat and exterior mirror position
for driving forwards
Storing takes place automatically every time the ve-
hicle is locked.
The seat position can be stored if the angle of in-
clination of the seat back relative to the seat surface
is less than approximately 110° and the seat is not in
any of the end positions.
Central locking
Functionality
Central locking system
The system unlocks and locks all doors, the fuel filler
flap and the boot lid at the same time.
Unlock indicator: double flashing of the indicator
lights.
Memory function of the key
›
Remove the battery.
›
Press any button on
the remote key to re-
set the key.
›
Insert the new battery.
›
Fit the battery cover
and press until it clicks
into place.
Lock indicator: single flashing of the indicator lights.
The warning light in the driver's door will flash for
about 2 seconds in quick succession after the vehicle
is locked, then it will start flashing regularly at longer
intervals.
If none of the doors or the boot lid is opened
within 45 seconds of unlocking, the vehicle automat-
ically locks again.
SAFE function
Depending on the equipment, the SAFE function can
be integrated into the central locking system.
The SAFE function prevents the doors from opening
from the inside once the vehicle is locked.
The SAFE function switches on when the vehicle is
locked.
In the display of the instrument cluster after the igni-
tion is switched off, a message regarding the SAFE
function is displayed.
DANGER
Risk of death!
When the vehicle is locked and the SAFE function
▶
is switched on, nobody is allowed to remain in the
vehicle.
Turn off the SAFE function
By double locking within 2 seconds.
▶
Or:
Together with the deactivation of the interior mon-
▶
itoring
» page 26,
Settings.
The warning light in the driver's door will flash for
about 2 seconds in quick succession after the vehicle
is locked, then goes out and starts flashing regularly
at longer intervals after about 30 secs.
When the SAFE function is switched off, the door
can be opened from the inside by pulling once on the
opening lever.
The SAFE function is switched on again after unlock-
ing and locking the vehicle.
Operation
Ways in which central locking operates
Key
» page
23.
▶
Central locking button.
▶
Lock/unlock using the central locking button
›
The
button in the middle part of the control pan-
el.
The
symbol in the button comes on when locked.
The button locks all of the doors and the boot lid.
The vehicle is also unlocked when a door is opened
from the inside.
Advertisement
Table of Contents
