Table of Contents
Advertisement
Key with removable key bit
into place.
Memory function of the key
Functionality
Applies to vehicles that do not have the personalisa-
tion function.
Each time the vehicle is locked, the position of the
driver's seat and rearview mirror are stored in the
memory of the remote key being used to lock the
vehicle.
Keys, locks and alarm system ›
›
Take out the battery.
›
Press any key on the
radio key, and the key
resets.
›
Insert the new battery.
›
Fit the battery cover
and press until it clicks
into place.
›
Remove the key bit
and partially insert it
into the opening.
›
Press the key bit to un-
lock the top cover.
›
Slide on the battery
cover.
›
Use a thin screwdriver
in the recess
insert
A
and remove the bat-
tery.
›
Press any key on the
radio key, and the key
resets.
›
Insert the new battery.
›
Fit the battery cover
and press until it clicks
Memory function of the key
Operation
Retrieve saved position
›
Unlock the vehicle and open the driver's door.
The driver's seat and the exterior mirrors occupy the
position assigned in the memory to the key used to
unlock the vehicle.
Stop position change
›
Press any button on the seat to be adjusted.
Or:
›
Press
the button on the key.
Settings
Activate and deactivate the memory function of
the key
The function is activated or deactivated in the fol-
lowing menu in the Infotainment system.
Or:
Storing driver's seat and exterior mirror position
for driving forwards
The data is saved automatically each time the vehicle
is locked.
The seat position can be stored if the angle of in-
clination of the seat back relative to the seat surface
is less than approximately 110° and the seat is not in
any of the end positions.
Storing front passenger´s exterior mirror position
for reversing
›
Unlock the vehicle with the key.
›
Turn on the ignition.
›
Activate the folding function of the mirror in the
Infotainment in the following menu.
Or:
›
Put the knob for the exterior mirrors in position .
›
Engage reverse gear.
›
Adjust the mirror to the desired position.
›
Disengage reverse gear.
The set mirror position is saved.
25
Advertisement
Table of Contents
