Skoda Citigo Owner's Manual page 23

Safety belt fastened/not fastened (belt status display) - Rear
seat /
After switching on the ignition, the belt status indicator lights up for the rear
seats in the instrument panel display for 30 seconds and indicates whether any
rear seat passengers have fastened their seat belts. The belt status indicator will
then light up when the passenger on the rear seat fastens or unfastens the seat
belt (when the ignition is switched on or during the journey).
If the warning light , is switched on, the passenger on the rear seat has their
seat belt on.
If the warning light , is switched on, the passenger on the rear seat does not
have their seat belt on.
If a seat belt is unfastened on the rear seat during the journey at a speed of more
than 25 km/h, an acoustic signal will sound, and the belt status indicator for the
rear seats will flash for around 30 seconds.
Further information » page 80, Seat belts.
City Safe Drive 
If the City Safe Drive system is currently slowing the vehicle down automatically,
the warning light will flash  quickly.
If the City Safe Drive system is not currently available, or if there is a system fault,
the warning light will flash  slowly.
When the City Safe Drive system is switched off while the vehicle is travelling at a
speed between 5 – 30 km/h (3 - 19 mph), the warning light   will light up in
the instrument cluster display.
If the City Safe Drive system is switched on, the warning light in the instrument
cluster display   will light up for around 5 seconds.
Further information » page 68, City Safe Drive.
START STOP 
If the START STOP system is active, the warning light will light up .
If the START STOP system is active, but automatic engine shut down is not possi-
ble, the warning light will light up .
22
Using the system
When the warning light flashes  the START STOP system will not be available.
Further information » page 67, START/STOP.


