Table of Contents
Advertisement
Set the length of the seat manually
Memory function of the seat
Functionality
Valid for vehicles with electrically adjustable driver's
seat.
Each of the memory buttons on the driver's seat can
be used to store and recall the set driver's seat and
exterior mirror position.
Depending on the equipment, the front passenger
seat may also have a memory function.
Operation
Retrieve stored position
›
With the ignition off and the driver's door open,
press the desired memory button.
›
In other instances, hold the button for example
with the ignition switched on or the driver's door
closed.
The passenger seat position can be retrieved in the
same way.
Stop position change
›
With the ignition off and the driver's door open,
press any button on the seat to be adjusted.
Or:
›
Press the
button on the key.
›
In other cases, release the held memory button.
Seats, steering wheel and mirror ›
›
Press the release han-
dle.
›
Push the front part of
the seat forwards or
backwards.
Memory function of the seat
Settings
Storing driver's seat and exterior mirror position
for driving forwards
The seat position can be stored if the angle of in-
clination of the seat back relative to the seat surface
is less than approximately 110° and the seat is not in
any of the end positions.
Save front passenger seat position
Storing the passenger seat position is analogous to
storing the driver's seat position.
Storing front passenger´s exterior mirror position
for reversing
›
Turn on the ignition.
›
In the Infotainment system, select the menu
Outside .
›
By moving your finger sideways, choose the screen
with the menu item Mirror .
›
Select Mirror and activate the mirror's fold function.
›
Turn the exterior mirror knob to the position .
›
Engage reverse gear.
›
Adjust the mirror to the desired position.
›
Disengage reverse gear.
The set mirror position is saved.
When changing the stored seat and exterior mir-
ror position for forward driving, the passenger exte-
rior mirror position for reverse driving must be re-
stored.
Driver's seat - entry assist function
Depending on the equipment, the vehicle can have
an entry assist function.
When the driver's door is opened, the seat moves in-
to a position that enables easy entry.
The seat moves back to the saved position as soon
as the door is closed and the ignition is switched on.
The seat moves to a position that allows easy exit as
soon as the ignition is switched off.
The function is activated in the Infotainment system
in the menu
35
›
Turn on the ignition.
›
Adjust the seat and the
exterior mirrors.
›
Press the button
A
and within 10 seconds
one of the memory
buttons
.
B
Storing is confirmed by
an acoustic signal.
Interior Seats.
Advertisement
Table of Contents
