Interrogating And Erasing Fault Memory - Skoda OCTAVIA 2004 Workshop Manual

OCTAVIA
Test of vehicle systems
Select function XX
Test of vehicle systems
Select function XX
X faults recognized!
Test of vehicle systems
Select function XX
Edition 12.00
S00.5111.54.20
Self-diagnosis
♦ Storage of non-existent faults in fault memory
♦ Functions not being performed
♦ Reduction in life of automatic gearbox
If the code does not match the corresponding
version in the vehicle:
- Check coding of engine control unit ⇒ page
01-23, Coding engine control unit.
- Press → key.
K Readout in display:
HELP
- For further procedure ⇒ Repair descriptions.
Interrogating and erasing fault
memory
Special tools, testers and aids required
♦ Vehicle system tester V.A.G 1552 with cable
V.A.G 1551/3, 3A, 3B or 3C
Interrogating fault memory
- Connect vehicle system tester V.A.G 1552
with cable and select engine electronics con-
trol unit (address word 01). Engine should
be idling for this step.
(Connecting vehicle system tester and se-
lecting engine electronics control unit ⇒ page
01-2).
Only if the engine does not start:
- Switch ignition on.
HELP K Readout in display:
- Enter 02 for the function „Interrogate fault
memory“ and confirm the entry with the key
Q.
K The number of stored faults or „No fault recog-
nized!“ appears in the display.
If no fault is stored:
- Press → key.
K Readout in display:
HELP
- Enter 06 for the function „End output“ and
confirm entry with the key Q.
01
------------ 01-5 ------------ ------------ 01-9 ------------