›
Release the lever. The washer system stops and the wiper continues for anoth-
er 1 to 3 wiper strokes (depending on the duration of the spraying process). The
lever will stay in position after releasing it
Switching windshield wipers off
›
Move the lever back into the home position
Replacing the windscreen wiper blades
ä
First read and observe the introductory information and safety warn-
ings
on page 36.
Before replacing the windscreen wiper blade, put the windscreen wiper arms into
the service position.
Service position for changing wiper blades
›
Closing the bonnet.
›
Switch the ignition off and on again.
›
Press the windscreen wiper lever into position
wiper arms will move into the service position.
Removing the wiper blade
›
Raise the windscreen wiper arm from the rear window and slightly tilt the
windscreen wiper blade towards the wiper arm, arrow
›
Hold the windscreen wiper arm at the top end with one hand.
›
With the other hand unlock the locking button
in the direction of arrow
.
B
Attaching the wiper blade
›
Push the windscreen wiper blade until the stop and it locks in place.
›
Check whether the wiper blade is correctly attached.
›
Fold the wiper arm back to the windscreen.
38
Using the system
.
6
» Fig.
29.
0
Fig. 30
Windscreen wiper blade
» Fig.
29, the windscreen
4
» Fig.
30.
A
and remove the wiper blade
1
›
Turn on the ignition and press the windshield wiper lever into position
» Fig.
29, the windscreen wiper arms move to the home position.
4
Windshield wiper blades in proper condition are essential to obtain good visibility.
Wiper blades should not be allowed to become dirtied by dust, insect remains and
preserving wax.
Juddering or smearing of the wiper blades could then be due to wax residues left
on the windshield by vehicle washing in automatic vehicle wash systems. It is
therefore important to clean and degrease the lips of the windshield wiper blades
after every pass through the automatic vehicle wash system.
Replacing the rear window wiper blade
ä
First read and observe the introductory information and safety warn-
ings
on page 36.
Removing the wiper blade
›
Raise the windscreen wiper arm from the rear window and slightly tilt the
windscreen wiper blade towards the wiper arm, arrow
›
Hold the windscreen wiper arm at the top end with one hand.
›
With the other hand unlock the locking button
in the direction of arrow
.
B
Attaching the wiper blade
›
Push the windscreen wiper blade until the stop and it locks in place.
›
Check whether the wiper blade is correctly attached.
›
Fold the wiper arm back to the windscreen.
Fig. 31
Rear window wiper blade
» Fig.
31.
A
and remove the wiper blade
1