Turning On The Dvsr Xu - GE DVSR xU User Manual

DVSR xU User Manual

Turning on the DVSR xU

The DVSR xU is delivered with preconfigured settings. You only need to connect the cameras and the
monitors. After powering up, the DVSR xU will start to record immediately.
Note: The default video standard is PAL. For information on changing the standard, see section To select the
video standard on page 32.
The DVSR xU is equipped with a universal power supply that will auto-sense 100/240 V, 60/50 Hz.
Turn on the connected equipment. When you turn on the DVSR xU it automatically displays all
connected cameras. The DVSR xU shows the number of HDDs installed then displays live views from
each connected camera. It automatically begins recording.
To get the unit into operation quickly
1. Connect all the devices required to the back panel of the DVSR xU. See Figure 2 on page 3.
2. Turn on the unit. The unit automatically carries out a diagnostic test of the devices. The video
images then appear onscreen.
3. To modify the preconfigured settings, press the Menu button on the front panel to access the
main menu. The login dialog screen appears.
4. Enter the default administrator user ID and PIN. The main screen appears.
User ID = Administrator
PIN = 3477
5. Modify the DVSR xU parameters as required in the submenus.
6. When customization is complete, press Esc to exit menu mode and return to live mode.
5