GE DVSR xU User Manual page 54

50
Figure 38: The Recording menu
The following procedure shows how to change the recording settings of a selected camera in the
Recording menu. They can be changed in any order.
In the main menu, go to the Recording icon and press Enter or left-click the mouse. The Recording
menu appears.
To save changes made in the menu
1. When you have made all the changes required in the Recording menu, go to OK and press Enter
or left-click the mouse to save all the changes. To abort the changes, select Cancel and press
Enter. You will then return to the main menu.
Note: Selecting OK in submenus confirms but does not save the changes made. Changes are only saved
when OK is selected in the Recording menu.
To setup how the DVSR xU will respond to full HDDs
You can select how the DVSR xU responds when its HDDs become full and there is no longer sufficient
space to save new data.
1. In the Recording menu go to the Record Mode list box and select one of the two options:
Table 13: Options on how to respond to full HDDs
Option
Continuous
No Overwrite
Description
When all the HDDs in the DVSR xU are full, the DVSR will overwrite the earliest written recorded
files and continue recording.
When all the HDDs in the DVSR xU are full, the DVSR will handle the event as a "Hard Disk Full"
condition and respond according to how this condition has been programmed under the
Notification menu. For more information, see page 56.
DVSR xU User Manual