GE DVSR xU User Manual page 65

DVSR xU User Manual
8. Go to the NTP check box and press EDIT or left-click the mouse to enable () or to disable the
option.
9. Go to the Time Zone edit boxes and set the time zone in which the DVSR xU is located.
10. Go to the Interval edit box and enter the number of hours after which the DVSR xU should
synchronize its time with that of the network server.
11. Go to the NTP Host check box and press EDIT or left-click the mouse. Enter the NTP server
address.
Note: For the NTP to work, the DNS IP address needs to be setup correctly.
12. When all the changes have been done, select OK to confirm the changes and return to the
Network menu.
To setup a PPPoE dial-up setting
1. In the Network menu go to the PPPoE setup box and press Enter or left-click the mouse. The
PPPoE submenu appears.
2. Go to the PPPoE check box and press Enter or left-click the mouse to enable () or disable the
option.
3. Go to the User Name edit box and press EDIT. Enter the user name provided by the ISP. If using the
front panel or remote control, press Enter to accept the changes.
4. Select Password and press EDIT or left-click the mouse. Enter the password provided by the ISP. If
using the front panel or remote control, press Enter to accept the changes.
5. Select Confirm and press EDIT or left-click the mouse. Re-enter the password and press Enter
again.
6. When all the changes have been done, select OK to return to the Network menu.
61