GE DVSR xU User Manual page 62

58
1. In the Network menu go to the DNS edit box and press EDIT or left-click the mouse. Using the
numeric buttons enter the DNS number. Press Enter or left-click the mouse to accept the changes.
To change the Network communication port value
1. In the Network menu go and go to the Com Port edit box and press EDIT or left-click the mouse.
Using the numeric buttons enter the address and press Enter. The number must be greater than
2000.
To change the HTTP port value
1. In the Network menu go to the HTTP Port edit box and press EDIT or left-click the mouse. Using
the numeric buttons enter the IE browser port value. Press Enter or left-click the mouse to accept
the changes. The default value is 80.
Note: If you change the http port from the default value 80 then you must also enter the port value in the IE
Browser address. For example, if the http port is 81 and IP is 192.168.222.12 then in the browser enter
http://192.168.222.12:81
To setup E-mail notification
1. In the Network menu go to the E-mail setup box and press Enter or left-click the mouse. The E-
mail submenu appears. See Figure 42.
Figure 42: E-mail submenu
2. If your E-mail server requires a user name and PIN when you want to send an E-mail, select
Authentication and press EDIT or left-click the mouse to enable the check box (). The User and
Password setup boxes are activated.
3. Go to the User edit box and press EDIT or left-click the mouse. Enter the e-mail account user
name. If using the front panel or remote control, press Enter to accept the changes.
DVSR xU User Manual