GE DVSR xU User Manual page 31

DVSR xU User Manual
Figure 23: The DVSR xU main menu
Action frame
Table 5: Description of the eight menu icons
Menu icon
Display
Cameras
Recording
Network
Alarms
PTZ
User
System
To access the main menu
1. On the front panel of the DVSR or the IR remote control press the Menu button, or right-click the
mouse and select menu. Enter your name and PIN, if requested. The main menu appears.
Note: The factory default Administrator name is "Administrator" and the PIN is " 3477 " .
2. Press the ESC button, or right-click the mouse, to quit the menu and return to the live mode.
Description
Configures the bus address, login PIN request, menu timeout, video standard, VGA, time and
date, and multiscreen.
See section Display on page 30.
Configures the camera titles, video adjustment, advanced camera settings, time and date
position, and motion detection.
See section Camera on page 36.
Configures the recording mode, e-SATA, image resolution, recording rates, bits rates, and pre
and post recording settings.
See section Recording on page 49.
Configures the standard network settings, e-mail, and advanced network settings.
See section Network on page 56.
Configures the alarm input type, alarm rules, alarm output type, PTZ linkage, notification
settings.
See section Alarm on page 63.
Configures the RS-485, PTZ protocols, and PTZ addresses. Comprehensive configuration of GE
domes, and basic setup of non-GE devices.
See section PTZ on page 69.
Configures user rights.
See section User settings on page 76.
Configures the RS-232. Manage firmware upgrade, and HHD. View log and system view.
Acknowledge alarms, reboot the DVR, and power off.
See section System on page 82.
27