GE DVSR xU User Manual page 84

80
Figure 55: The Set Privileges submenu (default shown)
4. Users can be given local and remote rights. See Table 22 on page 77 for the list. Select each item
that you want to assign to the user and press Enter or left-click the mouse to enable () or
disable.
5. Go to OK and press Enter or left-click the mouse to return to the user menu. Go to OK and press
Enter or left-click the mouse to save the changes and return to the main menu.
To setup a MAC address
The MAC address is not the DVSR xU address but that of the PC which will access the DVSR xU. If you
setup a MAC address, only the PC with that MAC address can access the DVSR xU.
1. At the PC in DOS prompt use the " ipconfig " command to get the PC MAC address (6 bytes).
2. In the User menu select Set Privileges and press Enter or left-click the mouse. The Set Privileges
submenu appears. See Figure 56.
DVSR xU User Manual