GE DVSR xU User Manual page 36

32
Front panel or remote
control
Mouse
To setup the PIN requirement
A PIN is required by default to access the DVSR xU. See section To modify a user's PIN on page 78 for
information on PINs.
1. In the Display menu go to the Log In PIN Required check box and press Enter or left-click the
mouse to enable or disable it ().
To setup the status bar
The status bar appears onscreen by default.
1. In the Display menu go to the Status Bar check box and press Enter or left-click the mouse to
enable or disable it ().
To setup the menu timeout
This is the time after which the screen saver appears.
1. In the Display menu go to the Menu Timeout list box and press Enter or left-click the mouse. Select
the time.
To select the video standard
DVSR can support PAL or NTSC video output. PAL is the default format.
1. In the Display menu go to the Video Standard list box and press Enter or left-click the mouse.
Select either NTSC or PAL video output format.
Note: If you are using default settings but the images on screen flicker, there is a NSTC/PAL mismatch.
Check the NTSC/PAL option selected in the Display menu.
To adjust the screen scaling
You can change the settings of the monitor display size to accommodate for differently sized
monitors.
1. In the Display menu go to the Video Scaler and press Enter or left-click the mouse to enable the
check box () When disabled, the video output display resolution is 704 x 576 PAL (or 704 x 480
NTSC). When activated the display resolution becomes 640 x 576 PAL (or 640 x 480 NTSC).
To change the menu transparency
You can modify the transparency of menu items on screen relative to the background to make the
text on screen easier to read.
1. In the Display menu go to the Menu Transparency list box and press Enter or left-click the mouse.
Select the transparency level. The screen transparency changes as you scroll through the list of
options.
Go to the Bus Address edit box and press EDIT. Using the number buttons, enter
the number of the device ID.
Go to the Bus Address edit box and left-click the mouse. Select the number from
the onscreen numeric display.
DVSR xU User Manual