Configuring The System Settings - GE DVSR xU User Manual

DVSR xU User Manual

Configuring the system settings

The following procedure shows how to specify system parameters. The options can be changed in
any order.
In the main menu, go to the System menu icon and press Enter or left-click the mouse. The System
menu appears.
To save changes made in the menu
1. When you have made all the changes required in the System menu, go to OK and press Enter or
left-click the mouse to save all the changes. To abort the changes, select Cancel and press Enter.
You will then return to the main menu.
Note: Selecting OK in submenus confirms but does not save the changes made. Changes are only saved
when OK is selected in the System menu.
To setup how to handle transaction information
1. In the System menu go to the Text Insertion setup button and press Enter or left-click the mouse.
The Text Insertion submenu appears.
2. Select one of the four text capture types from the drop-down list (see Table 23):

Network sniff

String from serial port

ATM CMD from serial port

Network receive
Depending on the text capture type selected, the menu options listed will differ.
a. Network Sniff: See Figure 58. Go to each of the settings and press EDIT or left-click the mouse
to enter edit mode. Enter the values. Select OK when completed and return to the System
men.
85