Minimum System And Component Requirements - Pirelli P.RG F4202N User Manual

Fiber optic intergrated access device

Table of Contents

MINIMUM SYSTEM AND

COMPONENT

REQUIREMENTS

P.RG F4202N

 No need for a dedicated, "always on" computer serving as your Internet con-

nection

 Cross-platform operation for compatibility with Microsoft® Windows and Ap-

ple® MAC computers (see Technical description for supported platforms).

 Easy-to-use, Web-based setup and configuration

 Centralization of all network address settings (DHCP)

 a Virtual server to enable remote access to Web, FTP, and other services on

your network

 a Security - Firewall protection - against Internet hacker attacks and encryp-

tion to protect wireless network traffic

 VoIP functionalities supporting existing analog phones

 Communication fallback of to analog lines in case of power or hardware

faults (if supported by your network operator)

 a multi-language GUI.

Your Router requires the computer(s) and components in your network to be

configured with at least the following:

 A computer with the Operating Systems that support TCP/IP networking pro-

tocols: Microsoft® Windows 98SE, Windows ME, Windows 2000, Windows

XP 32bit Windows Vista, Windows 7 or Apple® MAC 10.x

 An Ethernet 10Mbps or 10/100 Mbps NIC for each computer to be con-

nected to one of the four Ethernet ports on the rear of the Router

 As optional, an 802.11b/g/n wireless NIC

 At least, 60MB of free hard disk space

 At least, 128 MB of RAM

 Supported Browsers: Internet Explorer 5.5 or higher, Netscape 4.7 or higher

HBK 939800036-A1

Introduction

Table of Contents

Show Quick Links

Table of Contents