Simple Network Management Protocol - Pirelli P.RG F4202N User Manual

SIMPLE NETWORK
MANAGEMENT PROTOCOL
© (2010) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
Advanced Section
P.RG F4202N
Specify a name for the rule in the 'Name' field.
3.
Specify if the rule will be active/inactive during the designated time period, by
4.
selecting the appropriate 'Rule Activity Settings' check-box.
Click the 'New Time Segment Entry' link to define the time segment to which
5.
the rule will apply. The 'Time Segment Edit' screen will appear.
(a) Select active/inactive days of the week.
(b) Click the 'New Time Segment Entry' to define an active/inactive hourly
range.
Click 'OK' to save the settings.
6.
Scheduler Rules Panel
FIGURE 32.
Simple Network Management Protocol (SNMP) enables network management
systems to remotely configure and monitor Discus. Your Internet Service Pro-
vider (ISP) may use SNMP in order to identify and resolve technical problems.
Technical information regarding the properties of Discus SNMP agent should be
provided by your ISP. To configure Discus SNMP agent, perform the following:
1. Access this feature either from the 'Management' menu item under the 'Sys-
tem' tab, or by clicking its icon in the 'Advanced' screen.
2. Specify the SNMP parameters, as provided by your Internet service pro-
vider:
Allow Incoming WAN Access to SNMP Select this check box to allow ac-
cess to Discus SNMP over the Internet.
Read-only/Write Community Names SNMP community strings are pass-
words used in SNMP messages between the management system and Dis-
cus. A read-only community allows the manager to monitor Discus. A read-
write community allows the manager to both monitor and configure Discus.
HBK 939800036-A1 117