Lan Wireless 802.11N Access Point >> Advanced - Pirelli P.RG F4202N User Manual

LAN WIRELESS 802.11N
ACCESS POINT >>
ADVANCED
© (2010) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
Network Connections Section
P.RG F4202N
fault name by clicking its Edit action icon and changing the SSID value in the
'Configure LAN Wireless 802.11n Access Point - Virtual AP' screen.
Wireless WDS
It enables wireless bridging of access points within its range. Virtual access
points are used to interact with router's WDS peers, granting LAN users access
to remote wireless networks.
When enabled, a WDS List box is shown.
Internet Connection Firewall. Your gateway's firewall helps protect your com-
puter by preventing unauthorized users from gaining access to it through a net-
work such as the Internet. The firewall can be activated per network connection.
To enable the firewall on this network connection, select the 'Enabled' check
box.
LAN Wireless 802.11n Access Point >> Advanced Panel
FIGURE 13.
Additional IP Addresses. You can add alias names (additional IP addresses)
to the gateway by clicking the 'New IP Address' link. This enables you to access
the gateway using these aliases in addition to the 192.168.1.1
HBK 939800036-A1 43