Setting Up Your Computer; Ethernet Connection; Ethernet Connection >> Tcp/Ip Protocol Installation - Pirelli P.RG F4202N User Manual

Fiber optic intergrated access device

Table of Contents

>> TCP/IP PROTOCOL

INSTALLATION

Setting Up Your Computer

Setting Up Your

Computer

The Router has the ability to dynamically allocate network addresses to the

computers on your network, using DHCP. However, your computers need to be

configured correctly for this to take place. To change the configuration of your

computers to allow this, follow the instructions in this chapter.

In case you already established a connection with your Router a first time

and/or you do need to set up manually a connection to your Router, please fol-

low the instructions described in this chapter. You will be guided to set up an

Ethernet connection to the Router. To do so, first you have to verify the exis-

tence of a TCP/IP protocol stack and, then, according to your Operating Sys-

tem, to establish an Ethernet connection to it. This connection will require you to

enable your computer to receive from the Router its own IP Address automati-

cally: in such a case, the Router acts like the DHCP server in your local net-

work.

This procedure requires the TCP/IP protocol installed on your computer. Refer

to the following chapters and to your Microsoft® Windows or Apple® MacOS

10.x operating systems manuals.

Microsoft® Windows 98SE, ME, 2000

Put in the CD-ROM drive your Windows installation CD-ROM

Starting from Start -> Settings -> Control Panel -> Network Control Panel,

make a double click on the Network icon

HBK 939800036-A1

Table of Contents

Show Quick Links

Table of Contents