Pptp Server - Pirelli P.RG F4202N User Manual

PPTP SERVER

© (2010) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
Advanced Section
P.RG F4202N
Network Objects Panel
FIGURE 20.
To define a network object:
Click the 'Network Objects' icon in the 'Advanced' screen of the Web-based
1.
Management. The 'Network Objects' screen will appear
Click the 'New Entry' link, the 'Edit Network Object' screen will appear.
2.
Name the network object in the Description field, and click New Entry to ac-
3.
tually create it. The 'Edit Item' screen will appear. The source address can
be entered in one of the following methods: IP Address, IP Subnet, IP
Range, MAC Address and Host Name. When selecting a method from the
combo-box, the screen will refresh, presenting the respective fields by which
to enter the relevant information.
Select a method and enter the source address accordingly.
4.
Click 'OK' to save the settings.
5.
P.RG F4202N can act as a Point-to-Point Tunneling Protocol Server (PPTP
Server), accepting PPTP client connection requests. This screen enables you to
configure:
Enabled Select or deselect this check box to enable or disable this feature.
Note that checking this box creates a PPTP server (if not yet created with the
wizard), but does not define remote users.
Click Here to Create VPN Users Click this link to define remote users that will
be granted access to your home network.
Remote Address Range Use the 'Start IP Address' and 'End IP Address' fields
to specify the range of IP addresses that will be granted by the PPTP server to
the PPTP client.
HBK 939800036-A1 103