Pirelli P.RG F4202N User Manual page 121

© (2010) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
Advanced Section
P.RG F4202N
Web-Management' section, select both HTTPS port 443 and 8443, and
click 'OK'.
4. Back in the 'SSL VPN' screen, click the 'Click Here to Create SSL-VPN Us-
ers' link. The 'Users' screen appears, where you can define a user with the
'Remote Access by SSL VPN' option enabled.
5. In the 'SSL VPN' screen, click the 'New Shortcut' link. The 'Shortcut Wizard'
screen appears.
6. Choose whether to select a host from a given list, comprised of DHCP
leases that are known to Discus, or to manually enter the host's IP address,
and click 'Next'. If you choose 'From a List', the following screen appears.
Select the host to which you would like to add a shortcut, and click 'Next'.
The next wizard screen appears, either with the IP address of a selected
host, or without an IP address for manual selection.
7. In the 'Application' drop-down menu, select 'Remote Desktop (RDP)'. The
screen refreshes, displaying the RDP parameters.
8. In this screen, perform the following:

Enter a name for the shortcut.

Enter the IP address of the LAN computer on which the RDP will be per-
formed.

Select the 'Override Default Port' option if the LAN computer uses a port
other than the application's "well known" default port. An additional field
appears, in which you must enter the alternative port.

If you choose the default setting of requiring the user to specify login in-
formation when connecting with RDP, provide the username and pass-
word that are used to login to the LAN computer.

Select the size of the screen in which the remote desktop application will
be displayed.
9. Select the 'Edit the Newly Created Shortcut' check box in order to associate
a user or a group with this shortcut, and click 'Finish'. The 'Edit Shortcut'
screen appears.
10. Click the 'New User' link (or 'New Group' according to your preference), and
select a user with remote SSL VPN access permission from the drop-down
menu.
11. Click 'OK'. The new user is added to the 'Users' section in the 'Edit Shortcut'
screen. Click 'OK' to save the settings. The new shortcut is added to the
'Shortcuts' screen, and will be available for this user when connecting to the
SSL VPN portal.
HBK 939800036-A1 115