Wireless; Administrator - Pirelli P.RG F4202N User Manual

WIRELESS

ADMINISTRATOR

© (2010) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
24
P.RG F4202N
Click the 'Enabled' check box to enable your wireless connection. By doing that
you will be asked to set the SSID, the 802.11 Mode and the Security.
SSID. The SSID is the network name shared among all points in a wireless
network. The SSID must be identical for all points in the wireless network. It is
case-sensitive and must not exceed 32 characters (use any of the characters
on the keyboard). Make sure this setting is the same for all points in your wire-
less network. For added security, you should change the default SSID (openrg)
to a unique name.
802.11 Mode. Select the Wireless communication standard that is compatible
with you PC's wireless card. You can work in either 802.11n, 802.11g or in
mixed mode.
Security
To configure your wireless security select the WPA mode encryption.
WPA: WPA is a data encryption method for 802.11 wireless LANs.
Pre-Shared Key. Enter your encryption key in the 'Pre-Shared Key' field. You
can use either an ASCII or a Hex value by selecting the value type in the
combo-box provided.
In this section it is necessary to specify the administrator's e-mail in the 'E-mail'
field. System alerts and notifications are sent to this address.
HBK 939800036-A1 Quick Setup Section