Pirelli P.RG F4202N User Manual page 80

© (2010) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
74
P.RG F4202N
Traffic Priority Panel
FIGURE 2.
To set traffic priority rules:
Click 'Traffic Priority' under the 'QoS' tab in the 'Services' screen. The 'Traffic
1.
Priority' screen will appear. This screen is divided into two identical sections,
one for 'QoS input rules' and the other for 'QoS output rules', which are for
prioritizing inbound and outbound traffic, respectively. Each section lists all
the gateway devices on which rules can be set. You can set rules on all de-
vices at once, using the 'All devices' entry.
After choosing the traffic direction and the device on which to set the rule,
2.
click the appropriate New Entry link. The 'Add Traffic Priority Rule' screen
will appear.
HBK 939800036-A1 QoS Section