Wi-Fi Connection - Pirelli P.RG F4202N User Manual

WI-FI CONNECTION

© (2010) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
18
P.RG F4202N
It requires a computer with 802.11b/g/n (Wi-Fi Certified) wireless adapter installed.
Install your wireless adapter according to the manufacturer's instructions and
1.
verify that your computer is set to obtain an IP address automatically (DHCP
mode).
You will need to properly configure your adapter to communicate with the P.RG F4202N according to
the configuration rules.
In the configuration window of your wireless adapter scan the wireless net-
2.
work (marked with the relevant SSID name) present in your physical envi-
ronment.
Select the SSID of the P.RG F4202N
3.
Complete the configuration of the wireless adapter with the same parame-
4.
ters of the P.RG F4202N which are:
 RF channel; automatically detect
 WEP encryption enable or disable (default = Disable)
 WEP key size
 WEP key used
To check the connection, connect to the P.RG F4202N Home Page, entering
5.
http://192.168.1.1/ in the address bar of your browser.
HBK 939800036-A1 Setting Up Your Computer