Ethernet Connection >> Ms Windows 98Se, Me, 2000 - Pirelli P.RG F4202N User Manual

ETHERNET CONNECTION
>> MS WINDOWS 98SE, ME,
2000
© (2010) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
Setting Up Your Computer
P.RG F4202N
Select Configuration -> TCP/IP and then click on the Add button
3.
Select Protocols, click on Add button and choose Microsoft TCP/IP. Then
4.
click on the OK button
After the computer reboots, you're ready to configure the TCP/IP settings
5.
Configure the Network adapter to obtain automatically an IP address
Microsoft® Windows XP
Put in the CD-ROM drive your Windows installation CD-ROM
1.
Starting from Start -> Settings -> Control Panel make a double click on the
2.
Network icon.
Select Protocol and click on the Add button. Select Microsoft and TCP/IP,
3.
then click on the OK button.
Configure the Network adapter to obtain automatically an IP address.
4.
Apple® MacOS 10.x
TCP/IP is installed on a MacOS system as part of Open Transport.
To configure TCP/IP on these Operating Systems follow these steps:
Select Start -> Settings -> Control Panel and make a double click on the
1.
Network icon.
Select Configuration ->TCP/IP then click on Properties button.
2.
Local Area Connection Properties
FIGURE 1.
HBK 939800036-A1 13