Restore Defaults; Routing - Pirelli P.RG F4202N User Manual

RESTORE DEFAULTS

ROUTING

© (2010) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
Advanced Section
P.RG F4202N
You may sometimes wish to restore the Router's factory default settings. This
may happen, for example, when you wish to build a new network from the be-
ginning, or when you cannot recall changes made to the network and wish to go
back to the default configuration.
To restore default settings:
Click the 'Restore Defaults' icon in the 'Advanced' screen of the Web-based
1.
Management. The 'Restore Defaults' screen will appear
Press 'OK' to restore Discus' factory default settings.
2.
Restore Defaults Panel
FIGURE 28.
Access the Router's routing settings by clicking the 'Routing' icon from the 'Ad-
vanced' screen. The basic 'Routing' screen will appear. Press the 'Advanced'
button to view the full routing settings.
Routing Table.
You can add, edit and delete routing rules from the routing table. Click the New
Route link. The 'Route Settings' screen will appear. When adding a routing rule,
you need to specify the following:
Name: Select the network device.
Destination: The destination is the destination host, subnet address, network
address, or default route. The destination for a default route is 0.0.0.0.
Netmask: The network mask is used in conjunction with the destination to de-
termine when a route is used.
Gateway: Enter the gateway's IP address.
HBK 939800036-A1 111