Hardware Installation; Introduction; Positioning The Router - Pirelli P.RG F4202N User Manual

Fiber optic intergrated access device

Table of Contents

Hardware Installation

Hardware

Installation

This chapter will guide you through a basic installation of the Router including:

Positioning the P.RG F4202N

Connecting the Router to your network

Setting up your computer for networking with the Router

Please read carefully the Safety Information in Appendix "A"

You should place the Router in such a location to ensure that:

 It is located near an electrical outlet and the fiber socket

 Water or moisture cannot enter the case of the unit

 It is out of direct sunlight and away from sources of heat

 The cabling is away from power lines, fluorescent lighting fixtures, and

sources of electrical noise such as radios, transmitters and broadband am-

plifiers.

 It is centrally located with respect to the wireless devices that will be con-

nected to the Router. A suitable location might be on top of a high shelf to

ensure the maximum coverage for all connected devices.

HBK 939800036-A1

Table of Contents

Show Quick Links

Table of Contents